Half a Pallet of Bostik Single-Flex FS Th-inset Mortar (12 bags, 600lbs)
Click to enlarge

Half a Pallet of Bostik Single-Flex FS Th-inset Mortar (12 bags, 600lbs)

MFR: Bostik Smart Adhesives
Product ID : half_a_pallet
Sale Price: $467.88
Compared at: $539.40
You Save: $71.52


E-mail to a friend



Offer includes:

Offer excludes (available at additional cost):

Fine Print:

  • Standard cancellation policy applies
  • Not valid for cashback
  • Offer cannot be combined with other specials or offers
  • Offer cannot be applied to past orders
  • Image may not reflect the exact product/service
  • Offer expires 6 months from date of acquisition

Product Details

  • Color: White
  • Weight: 50 lb.
  • For interior or exterior, residential or commercial
  • Rapid setting, use it to set and grout tile in the same day
  • Excellent for commercial installations with limited downtimes

Bostik Single-Flex FS Fast Setting is a premium multi-purpose polymer-modified thin-set mortar, use it for all types of ceramic, porcelain, granite, slate, marble, limestone, and dimensional stone tiles.

Product Use

Read and understand technical and safety data sheets completely before beginning installation. Follow applicable ANSI, NTCA and TCNA installation standards. Bostik Single-Flex Fast Setting thin-set mortar can be used for all tile absorption rates, from porcelain to Saltillo. Due to its fast setting properties, apply mortar to an area no greater than can be tiled in 10 to 15 minutes.

Surface Preparation

All surfaces must be structurally sound, clean, free of dust, dirt, oil, grease, water, curing compounds, sealers, waxes or any contaminants that may inhibit proper bond. TCNA recommends roughening or scarifying glazed tile substrates.

Tips and Recommendations

  • Shipping is at an additional cost. It can be picked up from our warehouse at no additional cost.
  • If purchasing over 10 bags, using freight may be considerably cheaper for you. Please contact us for more information.
  • Temperatures must be between 50°F (10°C) - 100°F (0°C) during installation.
  • Keep all foot traffic off the installation until the tile is firmly set (approximately 2-4 hours). Set times vary based on temperature, humidity, the porosity of substrate and tile size.

More about this product

Product Reviews

Login or Register to write the first review.